GPA calculator
Enter credits and a grade for each course to get your grade point average. You can edit the 4.5, 4.3 and 4.0 grade tables, and your grades are calculated in this browser only.
Assumption The grade tables are common examples based on published university tables. Your school’s rules come first, so change them under "Edit grade table" below.
Estimate for reference only — verify before relying on it.
Edit grade table
Change grade names and points to match your school. Points must not exceed the scale maximum and may have two decimals.
How it works
- 1. Pick a scale
- Choose 4.5, 4.3 or 4.0 and a common grade table is filled in. If your school differs, edit the table.
- 2. Add courses
- Write the course, credits and grade on one line. Press Enter in the credits field for a new line; each line shows the running GPA through that line. You can also paste a table copied from a spreadsheet.
- 3. Leave courses out
- Tick "Leave out of the average" for pass/fail courses or older grades replaced by a retake. They drop out of the GPA and the credit count.
- 4. See conversions
- Below the result you get a proportional conversion to the other scales and a percentage.
Worked example
Say you took four courses on the 4.5 scale. Multiply each course’s credits by its grade points, add the products, and divide by the total credits.
| Course | Credits | Grade | Points | Credits x points |
|---|---|---|---|---|
| Major required | 3 | A+ | 4.5 | 13.5 |
| Major elective | 3 | B0 | 3.0 | 9.0 |
| General | 2 | C+ | 2.5 | 5.0 |
| Lab | 2 | A0 | 4.0 | 8.0 |
| Total | 10 | - | - | 35.5 |
The GPA is 35.5 / 10 = 3.55.
- 0.5 credits of A+ and 1.5 credits of B0 give (0.5 x 4.5 + 1.5 x 3.0) / 2 = 3.375, rounded at the third decimal to 3.38.
- A GPA of 4.0 on the 4.5 scale becomes 4.0 / 4.5 x 4.3 = 3.82 on the 4.3 scale, or 88.89 percent.
- If you retook a 3 credit course with an F and earned an A0, tick "Leave out" on the old F line and keep the new grade. How retakes really count differs between schools.
Grade point examples
These are the tables commonly used on the 4.5 and 4.3 scales. The 4.0 scale is A 4.0, B 3.0, C 2.0, D 1.0 and F 0. Schools differ, so check your own rules.
| Grade | 4.5 scale | 4.3 scale |
|---|---|---|
| A+ | 4.5 | 4.3 |
| A0 | 4.0 | 4.0 |
| A- | - | 3.7 |
| B+ | 3.5 | 3.3 |
| B0 | 3.0 | 3.0 |
| B- | - | 2.7 |
| C+ | 2.5 | 2.3 |
| C0 | 2.0 | 2.0 |
| C- | - | 1.7 |
| D+ | 1.5 | 1.3 |
| D0 | 1.0 | 1.0 |
| D- | - | 0.7 |
| F | 0 | 0 |
Common mistakes
- Averaging the grade points without weighting. 3 credits of A+ and 1 credit of F average to 2.25 if you ignore credits, but weighted it is (3 x 4.5 + 1 x 0) / 4 = 3.375. Bigger courses count more.
- Using another school’s grade table. An A+ is worth 4.5 on the 4.5 scale but 4.3 on the 4.3 scale. Check the scale first.
- Leaving pass/fail courses or replaced grades in. Courses that do not count must be marked as left out for the average to match.
- Mixing up rounding and truncating. This tool rounds at the third decimal. If your school truncates, your transcript can differ by 0.01.
- Treating a converted value as official. A proportional conversion is a reference; use the recipient’s own table when there is one.
Sources and assumptions
The formula is a credit-weighted mean, checked against these public sources.
- Seoul National University grade point table (4.3 scale)
- Myongji University GPA rules (4.5 scale, weighted mean, third decimal rounded)
- Notre Dame Registrar GPA calculation (quality points / credit hours)
Values this tool assumes
- The 4.0 table (A 4.0 to F 0) is the common US convention simplified, without plus and minus grades.
- Credits are limited to steps of 0.5 and at most 30 per course. That limit only catches typing mistakes and is not an official rule.
- Rounding at the third decimal follows Myongji University’s rule. Some schools truncate instead.
- Conversion to another scale is a plain proportion, not an official formula.
Frequently asked questions
- How is a grade point average calculated?
- Multiply each course's credits by its grade points, add the products, and divide by the total credits. 3 credits of A+ (4.5) and 2 credits of B0 (3.0) give (13.5 + 6.0) / 5 = 3.90.
- How do I convert a 4.5 GPA to a 4.3 scale?
- This tool uses a simple proportion: GPA / current maximum x target maximum. A 4.0 on the 4.5 scale gives 4.0 / 4.5 x 4.3 = 3.82. It is not an official conversion, so use the recipient's table if there is one.
- How do I handle retakes and pass/fail courses?
- Tick the leave-out box on that line and it leaves both the GPA and the credit total. How a retake counts differs by school, so check your own rules.
- Does it round or truncate the third decimal?
- It rounds half up, so 3.375 becomes 3.38. Some schools truncate after two decimals, so your transcript can differ by 0.01.
- Are my grades stored or sent anywhere?
- No. Everything is calculated in this browser, nothing is sent to a server or saved, and your entries disappear when you refresh the page.